1. Switch ignition off.

2. Pry upper section of grip shell -1- upward out of mounts in door trim using wedge -3409-.

3. Depending on vehicle equipment, disconnect wiring harnesses from upper section of grip shell.

4. Remove two bolts -2- (1.5 Nm) in area of grip shell.

5. Remove bolt -3- and three bolts -4- (2 Nm).

6. Disengage door trim from mounts in lower area using disassembly pliers -3392-.

7. Disengage door trim from mounts on the sides using disassembly pliers -3392-.

8. Pull door trim vertically upward out of window shaft seal.

9. In vehicles with radio system, disconnect wiring harness from loudspeaker.

10. Disconnect door trim wiring harness from door control module.

11. Disengage release cable -5- from interior door mechanism -6-.

12. Remove bolt -7- (2 Nm) and pry cover of mirror triangle -8- out of mounts using wedge -3409-.

13. In vehicles with radio system, disconnect wiring harness from loudspeaker in cover.

前門駕駛座的門飾板比較難拆一些。我相信光用 3409 那個工具是無法拆開的。我在拆的時候,要拔的很大力。我都很怕一不小心拔斷了。

和拆後門一樣,需要用到 T20 及 T30 的螺絲起子。